HOW TO USE
1. Use a four-wheel aligner to determine whether the camber angle needs adjusting;
2. Remove the four-wheel aligner sensor (clamp), and remove the tire;
3. Place the magnetic level on the brake disc, and center the horizontal bubble of the level;
4. Press the On/Off switch of the level gauge to start up. After the reading is stable, press "Zero" to return to zero (when "0.0" and "zero" are displayed at the same time);
5. Replace the upper bolt of the original shock absorber with the upper eccentric bolt;
6. Adjust the eccentric screw to make the level reach the expected value, and lock the eccentric nut with a torque wrench (when the "inner arrow" points inward, it means a downward adjustment, while when the arrow points outward, it means an upward adjustment);
7. Install the tire and the clamp (sensor), re-measure with the aligner, and correct other angle data.

Specifications
- Material: High Density Aluminum
- Power Supply: 2 x AAA battery
- Product Weight: 0.2kg/0.44lb.

Package Included
- 1 * Digital Camber Gauge