Operation Instruction

1. Check whether the power supply meets the standards of the tire tank.

2. Place the tire groove in a smooth and stable place before use.

3. The blade should not be dry, fix the depth of the carving and expose a certain depth.

4. The contact points of the two copper-head clamp blades are not allowed to be combined, otherwise the host will be easily damaged.

5. While operating, hold the handle, confirm the front blade position be down, and the blade will turn red after 3 to 5 seconds.

6. It's electric (so be careful to release the handle immediately, or the blade will burn out after a long time).

7. At work, you can't push too hard.